We are all very familiar with ton bags. They are a kind of packaging material. With the advancement of technology and the development of the times, they have been widely welcomed by people. However, when we produce ton bags, we will inevitably encounter the problem of ton bag loss. However, if we pay attention to it during production, we can reduce the loss. So where can we lose ton bags in production? The following ton bag manufacturers will give you a detailed introduction.
1. The shapes of the inlet and outlet are different, and the unit consumption is different. For example, the conical body material mouth connected to the bag body will cause greater material waste. At the same time, it is also affected by the length of the material mouth. The longer the material mouth, the greater the unit consumption.
2. The consumption of the bag body of the ton bag manufacturer. The bag cover on the bag body is connected to the upper material mouth. The larger the size of the material mouth, the more wasteful the bag cover fabric needs to be dug. Similarly, the size of the bottom cloth cover and the lower material mouth is also one of the factors affecting the unit consumption.
3. The spacer bag is to prevent the bag body from bulging around after loading the goods, affecting transportation and storage, and saving space. There are many holes on each spacer to facilitate the smooth flow of logistics. The size and number of holes dug are the places with heavy unit consumption.
4. The consumption of round bags is also relatively large. Not only do you need to dig holes in the bag cover and bottom for the inlet and outlet, but you also need to cut the cover and bottom into a circle, which increases the unit consumption.
5. The consumption of slings and knotted belts is relatively small. This is generally due to the small amount of hair and floating silk consumed by the weaving machine when changing varieties and threading the palm and buckle.